Professional audio actuator troubleshooting

Professional audio Exciter: audio actuator is actually a harmonic generator, use one of the psycho-acoustic characteristics of sound signals are decorated and embellished by an audio processing devices. Following that when using the actuator under need to pay attention to some issues and actuator is prone to failure: 1, although theoretically use good actuator can enable increased loudness sound system, while at the same time signal 10dB output level and system output power is not too much change, but we still do not carry excessive actuator tuning, or they may damage the amplifier and speaker device. 2. the actuator IN/OUT in comparison with and without the incentive of sound effects, many sound engineer can't distinguish sounds the subtle differences, because the speaker out of voice rarely direct radiation to sound normal ear, so pay attention to when adjusting to the effects of acoustic venue to listen, brazenly chaos tune may cause sound weird, microphone transfusion, serious damage to the device when you also. 3, there are some of the acoustic field smooth reflection area because there are too many in the treble of the sound system is powerful, sound reflection is also very noisy, and if you then join the actuator "penetrating" is even worse, the treble will become more harsh, loud, acoustic feedback may become unmanageable, and therefore, better sound field is very important, nor is any sound field using actuator. We can see that although the use of universal digital processor is a trend, but now the digital processors rarely with incentive function, most are: balance, compressor, crossover, delay, and equality. As a result of high-quality audio actuator in quite a long period of time or irreplaceable.