CROWN Crown launched a new series of power amplifiers LPS.

CROWN Crown corporation is a manufacturer of professional audio equipment, and its main products include power amplifiers and microphones and other audio products. .Especially in the field of professional power amplifier deep knowledge. .Recently, CROWN launched a new design of the LPS 2008 series amplifier, the series includes LPS-800, LPS-1500, LPS-2500 three product models. .CROWNLPS Series crown power amplifier power amplifier uphold the traditional advantages and reliability, reduce weight, compact size designed to enhance the applicability of LPS amplifier, both as a touring or fixed installation system configuration, system configuration, all reflect it in the same .the superiority of the product. .Configured with high-performance thermal design efficient fans, the use of security provided. .Standard 2U height design saves closet space for the user. .CROWN LPS LPS series of built-in power amplifier limiter to protect the tweeter to be burned, and when the feedback caused by acoustic feedback, the general design of the amplifier output will suddenly jump in and burned tweeter. .LPS of the built-in power limiter limits the output power, reducing the failure caused by howling. .Kara OK rooms in many construction defects in the sound design has easily lead to the feedback whistle, LPS amplifier will be of much help. .Design of the front panel control and precise level of the four LED indicator shows working status, including the various control switches and rear panel input / output terminal, and internal protection circuit design, power amplifier including output current limiting, DC protection, overheating .and short circuit protection fuse and so on. .All of these features are designed using high quality materials to ensure product quality. .All three amplifiers are used LPS solid all steel chassis, and configured so as to avoid over-efficient fan forced heat buildup. .The front panel is equipped with two precise level control knob, a power switch and four LED lights, respectively, showing the channel clipping, power and fault conditions. .After the panel includes two balanced XLR input and output terminals is a professional Speakon ® sockets and fixed common terminal installed. .CrownAudio Audio Product Marketing Manager, Mr. BobLichty said: "LPS Series amplifier is very suitable for the environment need to work long hours, for example, the use of DJ and bands. Although its price is not expensive, but the performance and use, and there is no discount." Within the .Purchase power limiter to protect the tweeter unit. .Output power and frequency response curves match with JBL speakers. .Standard 2U height design, rugged steel enclosure, fashion innovation and compact and reliable. .Set [dual-channel] or [single bridge] conversion mode select dial file, suitable for different requirements, so that operation more efficient, simple and secure. .Sophisticated and intuitive signal and clipping LED display, but also provide more reliable fault diagnosis and protection, current limiting, DC output, overload and overheating protection. .Technical Specification Performance: Frequency Response (1W): 40Hz-20kHz, +0 /-3dB total harmonic distortion (THD): intermodulation distortion (IMD) 60Hz and 7kHz4: 1, full rated output to-30dB: slew rate: LPS .-800 -> 20V/us LPS-1500 -> 23V/us LPS-2500 -> 27V/us voltage gain: LPS-800 - 32dB LPS-1500 - 32dB LPS-2500 - 34dB attenuation factors ( .8 ohms), 10Hz-400Hz:> 300 Signal to Noise Ratio (below rated power, 20Hz-20kHz, A-weighted):> 100dB crosstalk between channels (below rated power): @ 1kHz-76dB / @ 20kHz58dB 4 ohm rated .power input sensitivity: 1.25V Input impedance (balanced / unbalanced): 20k ohm / 10k ohm connectors to control and monitor the input connectors: each channel of a balanced XLR output connector: Speakon ® connectors and a per channel .fader on the front panel binding control: power on / off, gain control for each channel after a control panel: output mode switch: stereo (dual channel) parallel or bridged power indicator: a blue LED indicator signal indicator .: a green LED indicator per channel peak indicators: a red LED indicator per channel Protection Indicator: Red LED indicator, one per channel, indicating channel closure construction: Protection: short circuit, no load, open / .Close cut, RF interference protection, stability, response or load mismatch. .Ventilation: front and rear air flow cooling: built-in natural cold heat sink, cooling fan, variable-speed control Overheat protection Dimensions (WxHxD): 482mmx89mmx386mm NW / GW: LPS-800 (9.5kg/10.9kg) LPS-1500 (10.4kg / .11.8kg) LPS-2500 (13.5kg/14.9kg).