What is the pressure limit of the startup time?.

Start time ATTACK TIME, this function is to determine when the compressor input signal is detected higher than the starting level after the compressor to work to the time required, the shorter the time set, the faster the compression of the signal but the signal dynamic .the greater the impact, showing, set to compare the quick start, when the compressor to start working soon head to the bass sound to squeeze out, feel the bass become scattered. .Slow start-up time, the compressor on the signal response was relatively slow, but the damage is relatively small signal dynamic. .Start-up time impact of speed on the low-frequency signal is relatively large, too fast can cause divergence bass, so if there is no sense of the capacity of high frequency in case of problems, the appropriate time to start slowing down a powerful bass to get clear, I generally put this .knob set at 3 o'clock position. .If for high frequency, I generally set in the 9 o'clock position. .If you compare the ear works, you can tune Do not listen to side, put a full bass, clear CD promoted large mixer signal to the compressor starts, and then slowly turn clockwise from fastest to slowest start time of the knob, when the bass .become a strong and clear voice, when on it..